Essential Audio

JP2.0 ribbon tweeter is a high-performance component which is probably the best choice to building/upgrade your loudspeaker. 

 NOTE: Silver face pictured not available - all supplied will have a black face. 

Features

	Super strong Neodymium magnet fro high efficiency
	Build-in impedance conversion transformer
	Effective from 1,400Hz upwards due to the large diaphragm area and low self-resonance.
	Extremely thin diaphragm (0.009mm Aluminum foil) guarantees a high degree of signal fidelity and broad frequency response.
	Low distortion factor, good power-handling capabilities, high linear impedance and amplitude frequency response and the broad frequency response range.
	Flat impedance from 1,000 to 40,000Hz

Specifications
Ribbon material	Aluminum
Ribbon mass	25mg
Ribbon dimension	8mmx120mmx0.009mm
Ribbon area	960 square millimeters
Gap flux	0.6 Tesla
Gap height	3mm
Impedance	7Ohm
DCR	0.02 ohm
Sensitivity	98dB/M/W
Frequency response	1,700~40,000Hz
Resonance frequency	440Hz
Power handling	17W Normal, 40W Max
Recommended crossover frequency	2,000Hz 3rd –Order

110mm ROUND CLASSIC AUDIOPHILE TRUE RIBBON - SOLD IN MATCHED PAIRS
Extremely thin Pure Aluminium 0.009mm Ribbon Diaphragm. Super strong Neodymium magnet for high efficiency. Built-in Linear Impedance conversion transformer. Incredibly flat impedance for easy crossover design. Effective from 1,700 Hz upwards due to the large diaphragm area and low self-resonance. High degree of signal fidelity and broad frequency response. Only 11mg mass for instantaneous signal response and micro-detail. Low distortion factor, good power-handling capabilities, highly linear impedance and amplitude frequency response and broad frequency response range. Flat impedance curve from 1KHz to 40KHz. This deluxe speaker range is individually factory tested and assessed then they are paired for specific efficiency and response matching. Ridged High-pressure injection moulded 5mm thick faceplate. Very competitively priced for this level of refined technology. Upgrade to the ultra high frequency response of today's audio equipment! Recommended crossover frequency 2,500Hz with -18dB Filter. The higher the crossover point, the higher the power rating of the ribbon.